Synthesis of HgI2 Nanoparticles and Nanorods by Laser Ablation in Liquid for Photodetector Applications: Effect of Laser Fluence

In this study, mercury iodide (HgI₂) nanoparticles (NPs) were synthesized by pulsed laser ablation in ethanol at laser fluences of 22.9, 33.1, and 43.3 J/cm². The effect of laser fluence on the structural and optical properties of HgI₂ NPs was studied. X-ray diffraction findings reveal that all synthesized HgI₂ samples were polycrystalline in nature with orthorhombic structure. Absorption peak was appeared at 474 nm and the optical energy gap of HgI₂ NPs decreases from 2.13 to 2.05 eV as laser fluence increased from 22.9 to 43.3 J/cm². Zeta potential (ZP) results confirm that the nanoparticles synthesized at 22.9 and 33.1 J/cm² have high degree of stability. Fluorescence measurements show the presence of several emission bands. Raman spectra of HgI₂ NPs show the presence of six vibration modes centered at 15, 29, 37, 44, 51, and 70 cm^?1. Fourier transform infrared (FT-IR) results show the presence of two bonds, namely, C–O and Hg-I. Transmission Electron Microscope (TEM) results showed that the formation of spherical nanoparticles for sample prepared at 22.9 J/cm², 25–75 nm in size. While the nanoparticles synthesized with 33.1 and 43.3 J/cm² exhibit nanorods and nanotubes morphologies, respectively. The dark I–V characteristics of β-HgI₂ NPs/Si heterojunction photodetectors show rectification properties and the junction quality depends on the laser fluence and the best junction characteristics was obtained for heterojunction prepared at 33.1 J/cm². The white light photosensitivity of the HgI₂/p-Si photodetectors was measured at reverse bias under different intensities. The maximum responsivity reached was 3.39A/W at 450 nm for photodetector prepared at 33.1 J/cm².

     

Alginate@Layered Silicate Composite Beads: Dye Elimination,Box–Behnken Design Optimization and Antibacterial Property

Journal of Inorganic and Organometallic Polymers and Materials - The discharge of industrial waste comprising organic pollutants into aquatic environment induces numerous health risks. Crosslinked...     

Rational Optimization of Dihydropyrimidinone-Quinoline Hybrids as Plasmodium falciparum Glutathione Reductase Inhibitors

A series of dihydropyrimidinone-based antimalarial compounds were designed and synthesised based on the previously identified amide-based quinoline hybrids which showed good resistance reversal ability against the resistant strain of Plasmodium falciparum. The aromatic ring on the dihydropyrimidinone of the original hits was exchanged for a methyl group to bring the molecular weights below 500 Da and also determine the effect of the aromatic ring count on the resistance reversal ability of the hybrids. Apart from the previously used amide bond, the hybrid linker was also extended to the triazole linker. Although the triazole linker is synthetically easier to access, the use of an amide linker seems to have an activity advantage. The synthesised compounds in addition to the previously identified hits were subjected to molecular docking particularly targeting the orthosteric site of Plasmodium falciparum glutathione reductase (PfGR) protein. The ligand with the best binding interaction was rationally optimised to increase its suitability as a competitive inhibitor against the cofactor of the PfGR. Two of the optimised ligands showed better binding affinities than the cofactor while one of the two ligands displayed hydrophobically packed correlated hydrogen-bond which is very important in maintaining the ligand stability within the protein. In silico ADME predictions of the synthesised compounds indicate that these compounds possess good pharmacokinetic properties.     

Chryseobacterium meningosepticum in a parapneumonic effusion in a chronic kidney disease patient on hemodialysis

Chryseobacterium meningosepticum is an uncommon human pathogen, which is an inhabitant of soil and water. It should be included in the list of suspected nosocomial infections, especially in patients with immunocompromised status. C. meningosepticum infections are not common but are clinically important because the organism is naturally resistant to multiple antibiotics. We report a case where the bacterium was isolated from the pleural fluid from a chronic kidney disease patient on hemodialysis, who developed pneumonia with complicated parapneumonic effusion. To the best of our knowedge, this is the first case where C. meningosepticum is isolated from the pleural effusion, from India.     

Low‐cost dye‐sensitized solar cells with ball‐milled tellurium‐doped graphene as counter electrodes and a natural sensitizer dye

This paper presents a facile and economic development of dye‐sensitized solar cells using a nonprecious counter electrode made from ball‐milled tellurium‐doped graphene (Te‐Gr) and a natural sensitizer extracted from Calotropis gigantea leaves. The prepared materials were characterized using various techniques, such as Raman spectroscopy, X‐ray diffraction (XRD), atomic force microscopy (AFM), impedance spectroscopy, and scanning electron microscopy with built‐in energy‐dispersive X‐ray spectroscopy (SEM with EDS). The electrochemical activity of the produced counter electrodes and the impedance of the fabricated cells were examined and discussed to devise plans for future enhancement of cell performance. A clear pattern of improvement was found when using cost‐effective Te‐Gr relative to the costly platinum counter electrodes, especially when compared with cells employing another natural sensitizer. The results show approximately 51% enhancement over chlorophyll‐based cells made from spinach, where the added advantage in our approach is the utilization of an abundant plant extract with little nutritional appeal.     

Laboratory investigation on the use of thermally enhanced phase change material to improve the performance of borehole heat exchangers for ground source heat pumps

Ground source heat pumps have high efficiency and high capital cost primarily due to borehole drillings. This research investigates the inclusion of high‐conductivity phase change material (PCM) in the borehole heat exchanger of a ground source heat pump to reduce the borehole length required and improve its coefficient of performance (COP). In the laboratory model, the borehole heat exchanger was represented by a cylindrical electrical heater having a total power of 9.216 W, operating for 1 hour while resting for 3 hours. Surrounding the heater in the annular region, either soil, PCM, or high‐conductivity PCM was used as grouting material. The annular region was surrounded by a large amount of soil enclosed in a large bin as a representation of ground soil. The high‐conductivity graphite was impregnated with the commercial PCM “PureTemp29.” Results from the experiments revealed that the PCM is able to decrease the temperature fluctuations in the annular and soil regions, while graphite increases the thermal conductivity of the annular region and hence increases the rate of heat dissipation from the heater to the soil surrounding it. The maximum COP values of a ground source heat pump calculated assuming ideal reversed Carnot cycle for cooling mode showed an increase of approximately 81% with PCM and by 112% with graphite‐enhanced PCM.     

On global Hessenberg based methods for solving Sylvester matrix equations

In the first part of this paper, we investigate the use of Hessenberg-based methods for solving the Sylvester matrix equation $AX+XB=C$. To achieve this goal, the Sylvester form of the global generalized Hessenberg process is presented. Using this process, different methods based on a Petrov–Galerkin or on a minimal norm condition are derived. In the second part, we focus on the SGl-CMRH method which is based on the Sylvester form of the Hessenberg process with pivoting strategy combined with a minimal norm condition. In order to accelerate the SGl-CMRH method, a preconditioned framework of this method is also considered. It includes both fixed and flexible variants of the SGl-CMRH method. Moreover, the connection between the flexible preconditioned SGl-CMRH method and the fixed one is studied and some upper bounds for the residual norm are obtained. In particular, application of the obtained theoretical results is investigated for the special case of solving linear systems of equations with several right-hand sides. Finally, some numerical experiments are given in order to evaluate the effectiveness of the proposed methods.     

Development and in vitro characterization of chitosan-coated polymeric nanoparticles for oral delivery and sustained release of the immunosuppressant drug mycophenolate mofetil

Objective: To develop an oral sustained release formulation of mycophenolate mofetil (MMF) for once-daily dosing, using chitosan-coated polylactic acid (PLA) or poly(lactic-co-glycolic) acid (PLGA) nanoparticles. The role of polymer molecular weight (MW) and drug to polymer ratio in encapsulation efficiency (EE) and release from the nanoparticles was explored in vitro.

Methods: Nanoparticles were prepared by a single emulsion solvent evaporation method where MMF was encapsulated with PLGA or PLA at various polymer MW and drug: polymer ratios. Subsequently, chitosan was added to create coated cationic particles, also at several chitosan MW grades and drug: polymer ratios. All the formulations were evaluated for mean diameter and polydispersity, EE as well as in vitro drug release. Differential scanning calorimetry (DSC), surface morphology, and in vitro mucin binding of the nanoparticles were performed for further characterization.

Results: Two lead formulations comprise MMF: high MW, PLA: medium MW chitosan 1:7:7 (w/w/w), and MMF: high MW, PLGA: high MW chitosan 1:7:7 (w/w/w), which had high EE (94.34% and 75.44%, respectively) and sustained drug release over 12?h with a minimal burst phase. DSC experiments revealed an amorphous form of MMF in the nanoparticle formulations. The surface morphology of the MMF NP showed spherical nanoparticles with minimal visible porosity. The potential for mucoadhesiveness was assessed by changes in zeta potential after incubation of the nanoparticles in mucin.

Conclusion: Two chitosan-coated nanoparticles formulations of MMF had high EE and a desirable sustained drug release profile in the effort to design a once-daily dosage form for MMF.     

High gain observer for a class of nonlinear systems with coupled structure and sampled output measurements: application to a quadrotor

This paper proposes a new high gain observer for a class of non-uniformly observable nonlinear systems with coupled structure driven by sampled outputs. The considered class of systems is particularly constituted by several subsystems where each subsystem is associated to a subset of the output variables. The observer design is carried out through two steps. First, a high-gain observer is proposed in the continuous-time output case under the assumption that an adequate persistent excitation condition is satisfied by each subsystem. Then, the proposed observer is redesigned to handle the case of sampled outputs leading thereby to a continuous-discrete time observer. The latter property is achieved thanks to the approach pursued along the convergence analysis. The effectiveness of the proposed observer is emphasised in a realistic simulation framework involving a mathematical model of a quadrotor which is diffeomorphic to the proposed class of considered systems.